Servoplan Ki 11 sprint

Premium Fast Setting Self-leveling Compound

  • Quick-application, fast-setting formulation
  • Very short drying time for rapid project turnaround
  • Ready for floor coverings after just 60 minutes
  • Suitable for layer thicknesses from 1 to 10 mm / 1/25 to 3/8 in
  • Excellent self-leveling and flow characteristics
  • Very low tension
  • High final strength
  • Pumpable for efficient large-area application
  • VOC - 0.0 g/l

Servoplan Ki 11 sprint is a highly polymer-modified, self-leveling, quick-setting filler designed for rapid installation. It is suitable for leveling up to 10 mm on all substrates that are ready for floor coverings. PVC, LVT, linoleum, rubber, and textile coverings can be installed just 60 minutes after application. The product is also compatible with mastic asphalt of hardness class IC 10. At thicknesses of 5 mm or more, and when used with a suitable protective coating, it may serve as a wear layer in garages, warehouses, basements, and similar environments. For such applications, substrates such as concrete, cement, or calcium sulphate screeds must be primed with Okapox GF epoxy resin.

The substrate must be tested and confirmed ready for installation in accordance with VOB Part C, DIN 18365, DIN 18356, and recognized best practices. Pre-treatment should follow the guidelines outlined in the BEB data sheet “Assessment and Preparation of Substrates” and TKB-8. Depending on the substrate type and intended use, apply a suitable primer -such as Okatmos® EG 20, Okatmos® DSG,Bakit PV-Universal, Okamul PU-V rapid or Okapox GF - to ensure optimal bonding between the substrate and the leveling compound.

Mix Servoplan Ki 11 sprint with clean, cold water using an electric mixer at a maximum of 600 rpm until a smooth, lump-free consistency is achieved. Allow the mixture to rest for approximately 3–5 minutes, then stir briefly again to enhance flow and workability. Apply the compound using a smoothing trowel or squeegee, allowing it to self-level. Protect the surface from direct sunlight and drafts during the curing phase. When in doubt, perform a test application to verify suitability under site conditions.

Color

Gray

Application

Interior

Thickness of the application

1 mm to approx. 10 mm

Minimum 2 mm for hardwood flooring installations

Chair caster suitability

Suitable from 1 mm (per DIN EN 12529)

Water demand

Approx. 5.5 liters per 25 kg of powder

Processing time*

Approx. 15–20 minutes

Ready for traffic*

After approx. 40–50 minutes, regardless of layer thickness

Ready for installation*

Resilient floor coverings (e.g., PVC, LVT): after approx. 60 minutes

Hardwood, cork, and moisture-sensitive coverings: after approx. 12 hours

Floor heating system

Suitabel

GISCODE

ZP 1 (low-chromate content per TRGS 613)

EMICODE®

EC 1Plus (very low emissions, GEV-certified)

Storage

Store in a dry environment; shelf life approx. 6 months

* 

At 68 °F (+20 °C) and 65% relative humidity. Higher temperature and low humidity decreases, lower
temperature and high humidity increases this value respectively.

Approx. 1.4 kg/m² per mm of thickness

At 1 mm / 3/64"  thicknessAt 2 mm / 5/64" thickness

1.4 kg/m2/mm

153 ft2 per 3/64"

2.8 kg/m2/mm

76 ft2 per 5/64"

 

Clean tools and machines immediately with water.

DescriptionItem No. 
42 x 25 kg paper bags per pallet420654015705420653

Follow standard safety precautions when handling construction chemicals. Personal protective equipment such as gloves, goggles, and appropriate clothing is recommended. 

For detailed information on safe handling, storage, and disposal, consult the relevant Safety Data Sheet (SDS).

The aforementioned information, especially the proposals for processing and utilizing our product, is based on our knowledge and experience. We recommend that you carry out your own tests in every case to ensure the suitability of our products for the intended process and processing purposes because of the different materials and the working conditions which lie beyond our area of influence. No liability can be derived from this advice or from verbal advice, unless we are responsible for (criminal) intent or gross negligence in this respect.