Okapox Accelerator

Accelerator for 2-component epoxy resin systems

  • Shortens reaction times
  • Minimizes waiting times
  • Easy to apply
  • Universal use

Okapox Accelerator is an advanced additive formulated for 2-component epoxy resin systems. It is engineered to:

  • Accelerate reaction and curing times, enabling faster project turnaround
  • Reduce waiting periods between application steps and final installation
  • Ensure universal applicability with simple, user-friendly handling

Products suitable to be used with Okapox Accelerator:

  • Okapox GF – Epoxy resin primer
  • Okapox royal – Grout and adhesive mortar for walls and floor surfaces
  • Okapox royal Boden – Floor-specific epoxy resin grout and adhesive mortar

Key Benefits:

  • Rapid Curing: Speeds up the curing process, allowing for faster exposure to mechanical and chemical stresses
  • Improved Performance: Enhances both mechanical strength and chemical resistance in significantly less time
  • Versatile Use: Ideal for applications in both interior and exterior environments
  1. Pre-mix Base Components: Thoroughly mix the two components of the epoxy resin system until a uniform, homogeneous blend is achieved.
  2. Add Accelerator: Incorporate Okapox Accelerator according to the specified mixing ratio.
  3. Final Mixing: Stir the combined mixture thoroughly. Then transfer to a clean container and stir again to ensure complete homogenization.

Color

Yellow, transparent

Application

Compatible products:

  • Okapox GF
  • Okapox royal
  • Okapox royal Boden

Application temperature

+10 °C to +25 °C (50 °F to 77 °F)

Processing time*

Approx. 30 minutes

Ready for traffic* / ready for installation*

after approx. 3.5 to 4 hours

Final strength*

After approx. 3 days

Storage

Climate-controlled, up to 12 months (unopened)

* 

At 20 °C (68 °F) and 65% relative humidity. Higher temperatures and lower humidity reduce curing times; lower temperatures and higher humidity increase them.

⚠️ Safety Notice: Compliance with EU Regulation (2019/1148)

Okapox Accelerator contains reportable explosives precursors as defined under EU Regulation (EU) 2019/1148 on the marketing and use of explosives precursors. This regulation aims to restrict access to certain chemical substances that could be misused for the illicit manufacture of explosives.

Use by professionals only. Contains reportable explosives precursors – follow EU Regulation (2019/1148).

⚠️ Safety Precautions:

  • May irritate skin and eyes. Avoid contact.
  • Use in well-ventilated areas.
  • Wear gloves, goggles, and protective clothing.
  • Do not ingest. Avoid inhalation.
Okapox ProductApproximate Coverage per 200 ml Accelerator
Okapox GF3.5 kg
Okapox royal5.0 kg
Okapox royal Boden5.0 kg

Tools and equipment should be cleaned with water immediately after use to prevent hardening of residues and ensure ease of maintenance.

DescriptionItem No. 
200 ml / 3.3 oz plastic container140994015705140995

The aforementioned information, especially the proposals for processing and utilizing our product, is based on our knowledge and experience. We recommend that you carry out your own tests in every case to ensure the suitability of our products for the intended process and processing purposes because of the different materials and the working conditions which lie beyond our area of influence. No liability can be derived from this advice or from verbal advice, unless we are responsible for (criminal) intent or gross negligence in this respect.