Okamul RSG Plus

Smoothing and Filling Primer

  • Moisture Barrier System: Functions as a moisture barrier when combined with Servoplan Ki 300
  • All-in-One Performance: Fills, seals, and primes in a single step for streamlined application
  • Fast-Setting Formula: Enables quick progress on renovation and preparation work
  • Strong Adhesion: Delivers excellent bond strength to a wide range of substrates
  • Versatile Substrate Compatibility: Suitable for both absorbent and non-absorbent surfaces
  • Flexible and Malleable: Adapts well to irregular surfaces and jointed substrates
  • Low-Emission Certified: EMICODE EC 1Plus classification ensures very low VOC emissions,
  • supporting healthy indoor air quality
  • Enhanced with Kiesel Breathe Easy Technology and anti-microbial protection
  • VOC - 1.1 g/l

Okamul RSG Plus is a solvent-free base dispersion that, when combined with Servoplan Ki 300, forms a two-component, fast-drying cement-dispersion primer. Specially developed for interior renovation work, this system is not suitable for the direct installation of hardwood flooring.

Application Areas:

Okamul RSG Plus, in combination with Servoplan Ki 300, is designed for versatile substrate preparation in renovation projects:

  • As a Moisture Barrier
    For locking residual moisture up to 4.0 CM-% on cement-based, moisture-resistant substrates or 90% rH
  • As a Protective Barrier
    For shielding moisture-sensitive substrates such as:
    o Plywood, OSB, chipboard
    o Xylolite
    o Gypsum-bonded dry screeds
  • As a Primer and Filler
    o Raw or sanded wooden boards, chipboard, and OSB
    o Surfaces with firm, waterproof adhesive or old leveling compound residues
    o Dense, jointed coverings like ceramic, terrazzo, or artificial stone
    o Existing resilient coverings (e.g., PVC, linoleum) prior to new resilient or textile flooring
    o Metal substrates (e.g., checker plate, sheet steel)

Note: Not intended for use beneath ceramic tile or as a substitute for structural waterproofing systems.

  • Substrates must conform to country-specific building codes and recognized industry standards, such as the BEB guidelines (Germany) or CSA/A23.1 in Canada for concrete and screeds.
  • Substrates must be load-bearing, dry, dimensionally stable, and free from movement.
  • Remove all dust, oil, grease, wax, paint, curing compounds, and bond-breaking residues.

Mixing Procedure:

  • Pour Component A (Okamul RSG Plus dispersion) into a clean mixing container
  • Gradually add Component B (Servoplan Ki 300 powder) while stirring
  • Maintain a mixing ratio of 1 part A : 2.5 parts B by weight
  • Mix (max. 600 rpm) until a homogeneous, lump-free consistency is achieved

Working Time:

  • Pot life: Approximately 50 minutes under standard conditions (20 °C / 68 °F, 65% RH)

Mix only as much material as can be applied within the pot life. Do not retemper with water once the mix begins to set.

Application Modes

FunctionInstructions
PrimerApply evenly with a smoothing trowel over the prepared substrate. Allow to fully dry before applying an appropriate Kiesel smoothing compound.
Moisture Barrier (up to 4.0 CM-%)Apply using a 6 mm notched trowel, then smooth to ensure a closed layer of at least 1.2 mm. Once cured, overlay with Servoplan or ServoAlpha products.
Protective LayerFollow the same procedure as the moisture barrier for moisture-sensitive substrates. Ensure a uniform 1.2 mm layer before overlaying.

Ensure all applications are performed under controlled conditions with adequate ventilation. Do not apply below +15 °C.

Color

A: White (dispersion)

B: Dark grey (powder)

Application

Interior only

Chair caster suitability

Yes, when used with a compatible Kiesel patching or leveling compound

Application temperature

Minimum +15 °C

Mixing ratio

1 kg Component A : 2.5 kg Component B

Pot life*

Approx. 50 minutes

Ready for traffic* / ready for installation*

Approx. 1.5–2.0 hours

Floor heating system

Suitable

GISCODE

A: D 1 (solvent-free), B: ZP 1 (low chromate, TRGS 613)

EMICODE®

EC 1Plus (very low emission, certified by GEV)

VOC-marking

1,1 g/L

Storage

Approx. 12 months (climate controlled, unopened container)

* 

Values based on standard conditions: +20 °C and 65% relative humidity. Environmental conditions may accelerate or delay curing times.

  • This product does not replace structural waterproofing systems in accordance with DIN EN 18533/18534.
  • Always perform on-site testing to verify substrate compatibility and suitability.
  • Do not mix with other primers, fillers, or foreign materials not approved by Kiesel.
SubstrateCoverage
Chipboard, OSB, old parquetapprox. 202–401 ft² per 2.49 US gallons
Old floor finishes (PVC, linoleum, etc.)approx. 202–401 ft² per 2.49 US gallons
Residual adhesive or leveling compoundapprox. 152–406 ft² per 2.49 US gallons
Wood floorboards with jointsapprox. 152–406 ft² per 2.49 US gallons
Moisture barrier use (1.2 mm thick)approx. 38 ft² per 2.49 US gallons

Coverage may vary based on substrate texture, porosity, and application technique.

Clean all tools and application equipment immediately with water after use to prevent material buildup and ensure long-term usability.

DescriptionItem No. 
10 kg/ 2.49 U.S. gal/ 9.42 Liters plastic canister491094015705491097

The aforementioned information, especially the proposals for processing and utilizing our product, is based on our knowledge and experience. We recommend that you carry out your own tests in every case to ensure the suitability of our products for the intended process and processing purposes because of the different materials and the working conditions which lie beyond our area of influence. No liability can be derived from this advice or from verbal advice, unless we are responsible for (criminal) intent or gross negligence in this respect.